Home Team Field Setup

1. Unlock equipment box. Combo needed.
2. Take out bases, liner, rope, and hammer if necessary.
3. Locate & install first base. Dig out holes for base pegs if needed. (Marked on fence with red paint and on the ground with red ropes)
4. Locate & install second base. Dig out hole for base peg if needed. (Marked on the ground with red ropes)
5. Locate & install third base. Dig out hole for base peg if needed. (Marked on fence with red paint and on the ground with red rope)
6. Line a straight line from the back corner of home plate past first base (approx 20ft)
7. Line a straight line from the back corner of home plate past third base (approx 20ft)
8. Line a straight line perpendicular to the third base line at the 20 ft mark (Marked on ground with red ropes)
9. Line a straight line perpendicular to the third base line from the front corner of home plate to the backstop.
10. Using rope line a 150ft outfield line from the third base line to the first base line.
11. Place a cone approx 175ft from home plate on each foul line.
12. Make sure to place all equipment back into box and lock the box before leaving. Any equipment that goes missing or is lost is the responsibility of the home team. A fine will be levied for the replacement of any missing equipment.
13. Both teams are responsible for any garbage that is produced.